FR
EN
DE
CN
MANUFACTURING & MARKETING OF HYDRAULIC CYLINDERS
Mould, toolings & die casting
HPS International has a lot of experience in the mold business.
We can manufacture cylinders for the most complex molds for our clients.
Accessories
Flow Divider
Synchronizes the movements of 2 or 4 cylinders.
The Rotary Gear Flow Dividers allow to control accurately the movement on 2 or 4 cylinders either single or double acting. Each geared section is connected by a common axis, the rotating speed is the same for each section and the flow is proportional to the displacement in every chamber. Differential Relief Valves: Our modular design allows us to add differential relief valves in each section of our flow dividers. They also serve to protect the flow divider against excessive differential pressure in the divider which could be caused by actuators becoming stalled or restricted. These valves couldn't be used as general dump valve of the system.
Block Cylinders
VSP Series
- Includes new SL Mounting
- Compact and fast block cylinder.
- It mounts in place of the HVB Series or cylinders complying with the CNOMO standard 05.07.65 to 05.07.70.
- It is the ideal compromise between compact, robustness and speed.
Block Cylinders
VCE Series
Compact cylinder with mechanical sensors.
Feedings, fixation and several options fully configurable.
Block Cylinders
Tandem Series
Double stroke cylinder
Available in block or tie rod cylinder
Tie Rod Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Round Cylinders
H250 Co Series
- H250 Co cylinders are engineered in a modular system. All mounting types with the exception of the type "trunnion" are based upon one basic form and are built by screwing mounting components. Different piston rod ends can be combined with every mounting type.
- This cylinder can be used under the most severe conditions because of its construction design, its threaded cylindrical design, its sufficiently dimensioned guide lengths at the piston rod, as well as its heavy duty seals.
Round Cylinders
R160M Series
- Modular round cylinder.
- Fully configurable, thanks to a multitude of mounting and options.
- Complying with ISO 6020/1 - DIN 24333.
Round Cylinders
VPP Series
Specific cylinder. Short and fixed stroke.
Operating pressure: 250 bar
Bore Ø25 to Ø40 mm
Auto-Locking Cylinders
HRBN Series
Hydraulic cylinder, Double acting, Auto locking.
- Auto-locking cylinder with mechanical locking.
- Locking at rod out full stroke.
- Lock position is adjustable. +/- 2 mm
Specific Cylinders
VRE250 Series (Former HPS VRE)
Specific cylinder cooled by water
Specific Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Specific Cylinders
Telescopic hydraulic cylinder - New
Double stroke in standard body
- Core pull cylinders + Hydraulic shutters
- Iso- / Norm hydraulic cylinders
- HYDROPNEU standard series
- Block cylinders
- Hydraulic cylinders with limit switches
- Hydraulic cylinders with memory
- Chilled hydraulic cylinders
- Powerstroke hydraulic cylinders
- Custom-made cylinders for special purposes with specific layouts
- Locking cylinders
- Hydraulic cylinders with hydraulic locking (Typ53)
- Hydraulic cylinders with reinforced hydraulic locking
- Hydraulic cylinders with mechanical locking device
- Hydraulic locking device
- Hydraulic units
- Iso- / Norm hydraulic cylinders
- HYDROPNEU standard series
- Hydraulic cylinders with limit switches
- Hydraulic cylinders with memory
- Chilled hydraulic cylinders
- Custom-made cylinders for special purposes with specific layouts
- Hydraulic units
- Iso- / Norm hydraulic cylinders
- HYDROPNEU standard series
- Hydraulic cylinders with limit switches
- Hydraulic cylinders with memory
- Chilled hydraulic cylinders
- Custom-made cylinders for special purposes with specific layouts
- Hydraulic units
Accessories
Flow Divider
Synchronizes the movements of 2 or 4 cylinders.
The Rotary Gear Flow Dividers allow to control accurately the movement on 2 or 4 cylinders either single or double acting. Each geared section is connected by a common axis, the rotating speed is the same for each section and the flow is proportional to the displacement in every chamber. Differential Relief Valves: Our modular design allows us to add differential relief valves in each section of our flow dividers. They also serve to protect the flow divider against excessive differential pressure in the divider which could be caused by actuators becoming stalled or restricted. These valves couldn't be used as general dump valve of the system.
Block Cylinders
GVCN Series
- Robust and fast, ideal for heavy movements.
- The GVCN can be used in every application where a well guide movement, speed and stress resistance are needed.
- For example the ejection plates in the mold industry.
- Keyway and O-Ring ports with variable position.
- ISO Seals.
Block Cylinders
GVCN Series in Inches
GVCN Series now in Inches. Includes new M13 Mounting.
- ISO Seals. Robust and fast, ideal for heavy movements.
- The GVCN can be used in every application where a well guide movement, speed and stress resistance are needed.
- For example the ejection plates in the mold industry.
Block Cylinders
VCE Series
Compact cylinder with mechanical sensors.
Feedings, fixation and several options fully configurable.
Block Cylinders
Tandem Series
Double stroke cylinder
Available in block or tie rod cylinder
Round Cylinders
VPP Series
Specific cylinder. Short and fixed stroke.
Operating pressure: 250 bar
Bore Ø25 to Ø40 mm
Block Cylinders
VSP Series
- Includes new SL Mounting
- Compact and fast block cylinder.
- It mounts in place of the HVB Series or cylinders complying with the CNOMO standard 05.07.65 to 05.07.70.
- It is the ideal compromise between compact, robustness and speed.
Tie Rod Cylinders
H160 Co Series
- Modular tie rod.
- Fully configurable, in particular thanks to a multitude of mountings and options.
- Comply with ISO 6020/2 - DIN 24554.
Tie Rod Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Round Cylinders
VPP Series
Specific cylinder. Short and fixed stroke.
Operating pressure: 250 bar
Bore Ø25 to Ø40 mm
Specific Cylinders
VRE250 Series (Former HPS VRE)
Specific cylinder cooled by water
Specific Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Specific Cylinders
NUG Series
- Pusher cylinder for cutting tools
- The NUG Mounting as before is now NUGP and the new NUGV Mounting has been added with 4 types of fixations. – M2 ; M5 ; M10 ; M11
- HPS International NUG Series cylinders are equipped with 2 or more highly guide rods to increase the capacity of absorbing decentered/transverse efforts and at the same time transmit the necessary force to any point on the front plate. With the new NUGV, all this on one of the most compact cylinders on the market.
Specific Cylinders
Telescopic hydraulic cylinder - New
Double stroke in standard body
- Iso- / Norm hydraulic cylinders
- HYDROPNEU standard series
- Block cylinders
- Hydraulic cylinders with limit switches
- Hydraulic cylinders with memory
- Chilled hydraulic cylinders
- Idra core pull cylinders
- Powerstroke hydraulic cylinders
- Custom-made cylinders for special purposes with specific layouts
- Hydraulic cylinders with hydraulic locking (Typ53)
- Hydraulic cylinders with reinforced hydraulic lock
- Hydraulic cylinders with locking device
- Hydraulic locking devices
- Iso- / Norm hydraulic cylinders
- HYDROPNEU standard series
- Hydraulic cylinders with limit switches
- Hydraulic cylinders with memory
- Chilled hydraulic cylinders
- Custom-made cylinders for special purposes with specific layouts
Block Cylinders
VSP Series
- Includes new SL Mounting
- Compact and fast block cylinder.
- It mounts in place of the HVB Series or cylinders complying with the CNOMO standard 05.07.65 to 05.07.70.
- It is the ideal compromise between compact, robustness and speed.
Tie Rod Cylinders
H160 Co Series
- Modular tie rod.
- Fully configurable, in particular thanks to a multitude of mountings and options.
- Comply with ISO 6020/2 - DIN 24554.
Tie Rod Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Round Cylinders
VPP Series
Specific cylinder. Short and fixed stroke.
Operating pressure: 250 bar
Bore Ø25 to Ø40 mm
Specific Cylinders
VRE250 Series (Former HPS VRE)
Specific cylinder cooled by water
Specific Cylinders
VT-VB Series
- Modular and robust tie rods flanges.
- Fully configurable thanks to a multitude of mountings, feedings and options.
- Working pressure: (VT) 160 bar / (VB) 210 bar
- Bores: Ø32 ... 160 mm
Specific Cylinders
NUG Series
- Pusher cylinder for cutting tools
- The NUG Mounting as before is now NUGP and the new NUGV Mounting has been added with 4 types of fixations. – M2 ; M5 ; M10 ; M11
- HPS International NUG Series cylinders are equipped with 2 or more highly guide rods to increase the capacity of absorbing decentered/transverse efforts and at the same time transmit the necessary force to any point on the front plate. With the new NUGV, all this on one of the most compact cylinders on the market.
Specific Cylinders
Telescopic hydraulic cylinder - New
Double stroke in standard body
Specific Cylinders
NUG Series
- Pusher cylinder for cutting tools
- The NUG Mounting as before is now NUGP and the new NUGV Mounting has been added with 4 types of fixations. – M2 ; M5 ; M10 ; M11
- HPS International NUG Series cylinders are equipped with 2 or more highly guide rods to increase the capacity of absorbing decentered/transverse efforts and at the same time transmit the necessary force to any point on the front plate. With the new NUGV, all this on one of the most compact cylinders on the market.