Manufacture and sale of Type 53

Type 53

  • The new hydraulic cylinder Type 53 can be hydraulically interlocked in the front end position with a controllable shut-off unit which is integrated into the cylinder. The interlock can also be realized in the back end position. Interlocking systems usual in the market at present are working mechanically and, however, require a complex readjustment at inaccessible locations. In contrast, the hydraulic interlocking mechanism always works in the desired end position due to the used principle.
  •  
  • Type 53 cylinders are designed with tie rods. More mounting types and special designs are possible. Different piston rod ends can be combined with every mounting type.
  •  
  • An essential advantage in maintenance of Type 53 is the fast and simple replacement of the piston rod seal.
  •  
  • Important features of this series:
  •  
  • Piston diameter : 40 - 200 mm
  • Strokes up to 2000 mm
  • Operating pressure: 160 bar (16 MPa)
  • With / without end position cushioning with identical installation dimensions
  • Two area ratios phi = 1.4 and phi = 2.0
  • Piston speed up to 0.2 m/s
  •  
  • SERVICE:
  •  
  • CAD Data Configurator
  • We will gladly advise you on the design for your specific application.
  • We will also mount and commission your specialized cylinder on-site.
  •  
  • Please do not hesitate to call us at + 49 (0) 711 / 34 29 99-0
  • You can also use our contact form.
  •  
See our products Catalog

You will be redirected to the global GVCN 3Ds.
If it is an existing cylinder replacement, please send a request to hps@hpsinternational.com or contact your sales representative.
Simple Cylinders

Simple Cylinders

  • You need a cylinder with optimal performance and yet designed for a small space and manufactured in first-class quality for your special application? Adequate additional functions are more important to you than conformity with standards? Then simply select from our in-house standard types. HPS Hydropneu simple cylinders offer economy of space through their slim design and their minimum overall length. They offer the perfect solution for many problems in connection with features such as cooling jackets, possibilities of mounting switches, position measuring systems, etc. The piston diameters range from 12 to 200 mm, the strokerange reaches up to 2000 mm with nominal pressures building up to 400 bar. Our thick-walled cylinder pipes, which are honed at the inside and our ground, hard-chromium-plated piston rods, which can be surface-hardened if desired, guarantee a long life and high reliability in all our standard cylinders.
  •  
  • SERVICE:
  •  
  • CAD Data Configurator
  • We will gladly advise you on the design for your specific application.
  • We will also mount and commission your specialized cylinder on-site.
  •  
  • Please do not hesitate to call us at + 49 (0) 711 / 34 29 99-0
  • You can also use our contact form.
  •  

See our products